Description
Application
- 9107B is a 1- or 2-channel isolated 1:1 driver barrier for intrinsic safety applications.
- Operation and drive control of I/P converters, valves and indicators mounted in the hazardous area.
- Operation of HART devices is possible as the unit transmits HART communication signals bi-directionally.
- 9107B can be mounted in the safe area or in zone 2 / Cl. 1, div. 2 and transmit signals to zone 0, 1, 2 and zone 20, 21, 22 including mining / Class I/II/III, Div. 1, Gr. A-G.
- The PR 4500 displays the process value for each channel and can be used to define high and low limits for detection of loop current level. If these limits are exceeded, the status relay will activate.
- Dual channel versions can be used for signal splitter applications – 1 in and 2 out.
Advanced features
- The PR 4500 detachable displays and the green and red front LEDs indicate operation status for each channel.
- A tag number can be defined for each channel.
- Output line fault detection.
- In the 1-channel version the status relay can be used as a simple limit switch.
- Suitable for the use in systems up to Performance Level “d” according to ISO-13849.
Technical characteristics
- High galvanic isolation of 2.6 kVAC.
- High accuracy better than 0.1%.
- Continuous check of vital stored data for safety reasons.
Mounting
- The devices can be mounted vertically or horizontally without distance between neighbouring units.
Data sheet
Manuals
Environmental Conditions
| Operating temperature | -20°C to +60°C |
| Storage temperature | -20°C to +85°C |
| Calibration temperature | 20…28°C |
| Relative humidity | < 95% RH (non-cond.) |
| Protection degree | IP20 |
| Installation in | Pollution degree 2 & meas. / overvoltage cat. II |
Mechanical specifications
| Dimensions (HxWxD) | 109 x 23.5 x 104 mm |
| Dimensions (HxWxD) w/ PR 4500 | 109 x 23.5 x 131 mm |
| Weight approx. | 250 g |
| DIN rail type | DIN EN 60715/35 mm |
| Wire size | 0.13…2.08 mm2 AWG 26…14 stranded wire |
| Screw terminal torque | 0.5 Nm |
| Vibration | IEC 60068-2-6 |
| 2…13.2 Hz | ±1 mm |
| 13.2…100 Hz | ±0.7 g |
Common specifications
| Supply voltage | 19.2…31.2 VDC |
| Fuse | 1.25 A SB / 250 VAC |
| Max. required power | ≤ 1.0 W / ≤ 1.8 W (1 ch. / 2 ch.) |
| Max. power dissipation, 1 / 2 ch. | ≤ 1.0 W / ≤ 1.8 W |
| Test /working: Input to any | 2.6 kVAC / 300 VAC reinforced isolation |
| Analog output to supply | 2.6 kVAC / 300 VAC reinforced isolation |
| Status relay to supply | 1.5 kVAC / 150 VAC reinforced isolation |
| Response time (0…90%, 100…10%) | < 5 ms |
| Programming | PR 4500 communication interfaces |
| Signal dynamics, input | Analog signal chain |
| Signal dynamics, output | Analog signal chain |
| HART bi-directional communication frequency range | 0.5…7.5 kHz |
| Signal / noise ratio | > 60 dB |
| Accuracy | Better than 0.1% of sel. range |
| mA, absolute accuracy | ≤ ±16 μA |
| mA, temperature coefficient | ≤ ±1.6 μA / °C |
| Effect of supply voltage change on output (nom. 24 VDC) | < ±10 μA |
| EMC immunity influence | < ±0.5% of span |
| Extended EMC immunity: NAMUR NE21, A criterion, burst | < ±1% of span |
Input specifications
| Measurement range | 3.5…23 mA |
| Sensor error detection: Loop break 4…20 mA | < 1 mA |
| Input voltage drop, supplied unit | < 2 V @ 23 mA |
| Input voltage drop, non-supplied unit | < 4 V @ 23 mA |
Output specifications
| Signal range | 3.5…23 mA |
| Load (@ current output) | ≤ 725 Ω |
| Load stability | ≤ 0.01% of span / 100 Ω |
| Current limit | ≤ 28 mA |
| Relay function | N.C. |
| Programmable low setpoint | 0…29.9 mA |
| Programmable high setpoint | 0…29.9 mA |
| Hysteresis for setpoints | 0.1 mA |
| Max. voltage | 125 VAC / 110 VDC |
| Max. current | 0.5 AAC / 0.3 ADC |
| Max. voltage – hazardous installation | 32 VDC / 32 VAC |
| Max. current – hazardous installation | 1 ADC / 0.5 AAC |
| of span | = normal measurement range 4…20 mA |
Observed authority requirements
| EMC | 2014/30/EU & UK SI 2016/1091 |
| LVD | 2014/35/EU & UK SI 2016/1101 |
| ATEX | 2014/34/EU & UK SI 2016/1107 |
| RoHS | 2011/65/EU & UK SI 2012/3032 |
| EAC | TR-CU 020/2011 |
| EAC Ex | TR-CU 012/2011 |
| EAC LVD | TR-CU 004/2011 |
Approvals
| ATEX | DEKRA 11ATEX0247 X |
| IECEx | DEK 11.0088X |
| UKEX | DEKRA 21UKEX0173X DEKRA 23UKEX0108X
|
| c FM us | FM16US0465X / FM16CA0213X |
| INMETRO | DEKRA 23.0004X |
| c UL us, UL 61010-1 | E314307 |
| c UL us, UL 913 | E233311 (only 9107xx-U9) |
| CCC | 2020322304003422 |
| KCs | 21_AV4BO_0170X / 21_AV4BO_0171X (only 9107Bx-KCs) |
| EAC Ex | EAEU KZ 7500361.01.01.08756 |
| DNV Marine | TAA00000JD |
| ClassNK | TA24034M |
| SIL | SIL 2 certified & fully assessed acc. to IEC 61508 |
9107B HART Transparent Driver by PR Electronics: Your Gateway to Precision and Safety
The 9107B HART Transparent Driver by PR Electronics is the perfect solution for ensuring safe and reliable communication in industrial automation systems. Designed with cutting-edge technology, this device combines high performance, precision, and safety—making it an essential component for process industries around the globe.
Key Features of the 9107B HART Transparent Driver:
- HART Communication Transparency: Ensures seamless bidirectional communication between field devices and control systems, maximizing efficiency.
- High Precision Signal Conversion: Delivers accurate signal processing, supporting optimal system performance.
- Intrinsic Safety: Certified for use in hazardous areas, ensuring compliance with strict safety regulations.
- Universal Compatibility: Supports a wide range of field devices, making it suitable for diverse industrial applications.
- Durable Design: Built to perform consistently even in harsh environments, ensuring long-term reliability.
Why Choose the 9107B HART Transparent Driver from PR Electronics?
PR Electronics has established itself as a leader in industrial process instrumentation, and the 9107B HART Transparent Driver is a testament to their commitment to quality and innovation. By facilitating transparent HART communication and providing intrinsic safety, this device ensures streamlined operations, reduced downtime, and enhanced control over industrial processes.
Ideal for industries such as oil and gas, petrochemical, and manufacturing, the 9107B helps you maintain a safe and efficient environment without compromising on precision.
Optimize Your System with the 9107B HART Transparent Driver
Enhance your industrial processes with the 9107B HART Transparent Driver by PR Electronics. Its advanced features and robust design make it a must-have for professionals seeking dependable and innovative process control solutions. Contact PR Electronics or your local distributor today to learn more about integrating this powerful tool into your setup.
