Description
Advanced features – 5114B Programmable Transmitter
- The 5114 transmitter can be configured using the PReset software and the Loop Link communications unit.
Application
- Jumper selectable inputs for current/voltage or temperature.
- Programmable current (0…100 mA) and voltage (0…250 VDC) inputs.
- Linearized, electronic temperature measurement.
- Conversion of linear resistance variation e.g, from solenoids and butterfly valves or linear movements with attached potentiometer.
- 17.1 VDC loop and 2.5 VDC potentiometer supplies.
- Automatic 4- / 3-wire or programmable 2-wire cable compensation.
- Configurable sensor error detection including NAMUR NE43.
Technical characteristics
- Active or Passive current output and selectable voltage output.
- Separation of circuits in PELV/SELV installations.
- I.S. barrier for temperature sensors, potentiometers, and current / voltage signals.
- I.S. barrier with I.S. power supply for 2-wire transmitters in zone 0, 1, 2, 20, 21 and 2.
Note
- Not suitable for new installations requiring certification to the latest ATEX standards – see ATEX certificate DEMKO 99ATEX124571 and EU Declaration of Conformity for details.
Environmental Conditions – 5114B Programmable Transmitter
Operating temperature | -20°C to +60°C |
Calibration temperature | 20…28°C |
Relative humidity | < 95% RH (non-cond.) |
Protection degree | IP20 |
Mechanical specifications
Dimensions (HxWxD) | 109 x 23.5 x 130 mm |
Weight approx. | 225 g |
DIN rail type | DIN EN 60715/35 mm |
Wire size | 0.13…2.08 mm2 AWG 26…14 stranded wire |
Screw terminal torque | 0.5 Nm |
Vibration | IEC 60068-2-6 |
2…13.2 Hz | ±1 mm |
13.2…100 Hz | ±0.7 g |
Common specifications
Supply | |
Supply voltage, universal | 21.6…253 VAC, 50…60 Hz or 19.2…300 VDC |
Fuse | 400 mA SB / 250 VAC |
Max. required power | 2.1 W / 2.8 W (1 / 2 ch.) |
Max. power dissipation | 2.0 W |
Isolation voltage | |
Isolation voltage, test / working | 3.75 kVAC / 250 VAC |
PELV/SELV | IEC 61140 |
Response time | |
Temperature input, programmable (0…90%, 100…10%) | 400 ms…60 s |
mA / V input (programmable) | 250 ms…60 s |
Auxiliary supplies | |
2-wire supply (pin 44…42 and 54…52) | 28…17.1 VDC / 0…20 mA |
Programming | Loop Link |
Signal / noise ratio | Min. 60 dB (0…100 kHz) |
Accuracy | Better than 0.05% of selected range |
Updating time | 115 ms (temperature input) 75 ms (mA / V / mV input) |
Signal dynamics, input | 22 bit |
Signal dynamics, output | 16 bit |
Auxiliary voltages: Reference voltage | 2.5 VDC ±0.5% / 15 mA |
EMC immunity influence | < ±0.5% of span |
Extended EMC immunity: NAMUR NE21, A criterion, burst | < ±1% of span |
Input specifications
Common input specifications | |
Max. offset | 50% of selected max. value |
RTD input | |
RTD type | Pt100, Ni100, lin. R |
Cable resistance per wire | 10 Ω (max.) |
Sensor current | Nom. 0.2 mA |
Effect of sensor cable resistance (3-/4-wire) | < 0.002 Ω / Ω |
TC input | |
Thermocouple type | B, E, J, K, L, N, R, S, T, U, W3, W5, LR |
Cold junction compensation (CJC) | < ±1.0°C |
Sensor error current | Nom. 30 μA |
Sensor error detection | Yes |
Current input | |
Measurement range | 0…100 mA |
Min. measurement range (span) | 4 mA |
Input resistance: Supplied unit | Nom. 10 Ω + PTC 10 Ω |
Input resistance: Non-supplied unit | RSHUNT = ∞, VDROP < 6 V |
Voltage input | |
Measurement range | 0…250 VDC -150…+150 mV |
Min. measurement range (span) | 5 mV |
Input resistance | Nom. 10 MΩ (≤ 2.5 VDC) Nom. 5 MΩ (> 2.5 VDC) Nom. 10 MΩ (mV input) |
Output specifications
Current output | |
Signal range | 0…20 mA |
Min. signal range | 10 mA |
Load (@ current output) | ≤ 600 Ω |
Load stability | ≤ 0.01% of span / 100 Ω |
Current limit | ≤ 28 mA |
Sensor error indication | Programmable 0…23 mA |
NAMUR NE43 Upscale/Downscale | 23 mA / 3.5 mA |
Passive 2-wire mA output | |
Signal range | 4…20 mA |
Load stability | ≤ 0.01% of span / 100 Ω |
Max. external 2-wire supply | 29 VDC |
Effect of external 2-wire supply voltage variation | < 0.005% of span / V |
Voltage output | |
Signal range | 0…10 VDC |
Min. signal range | 500 mV |
Load (@ voltage output) | ≥ 500 kΩ |
of span | = of the presently selected range |
Observed authority requirements
EMC | 2014/30/EU |
LVD | 2014/35/EU |
ATEX | 2014/34/EU |
RoHS | 2011/65/EU |
EAC | TR-CU 020/2011 |
EAC Ex | TR-CU 012/2011 |
Approvals – 5114B Programmable Transmitter
ATEX | DEMKO 99ATEX124571, II (1) GD [EEx ia] IIC |
EAC Ex | EAEU KZ 7500361.01.01.08756 |
DNV Marine | TAA0000101 |
High-Performance Signal Conditioning for Industrial Applications
The PR Electronics 5114B Programmable Transmitter is a high-accuracy, versatile signal conditioning device designed to enhance industrial automation and process control. Engineered for seamless integration, the 5114B ensures precise signal conversion, isolation, and transmission, making it an essential component for demanding environments.
Key Features:
- Universal Signal Compatibility – Supports a wide range of input signals, including mA, voltage, potentiometer, and temperature sensors (RTD and TC).
- Flexible Output Options – Provides analog current/voltage output and relay switching for maximum adaptability.
- Advanced Galvanic Isolation – Offers 2.3 kVAC isolation between input, output, and power supply, ensuring optimal signal integrity and protection against electrical interference.
- Programmable via PC and PR 4501 – Enables easy parameter configuration, reducing setup time and enhancing usability.
- Fast Response Time – High-speed signal processing for real-time monitoring and control.
- Compact and Durable Design – DIN-rail mountable with robust construction suitable for industrial settings.
Applications:
Ideal for industries requiring precise signal conditioning, the PR Electronics 5114B is used in:
- Industrial automation
- Process control systems
- Power plants and utilities
- Chemical and pharmaceutical manufacturing
- Machine monitoring and safety applications
Why Choose the PR Electronics 5114B?
The 5114B Programmable Transmitter is designed for professionals who demand accuracy, reliability, and flexibility in their signal conditioning solutions. With its intuitive programming, robust isolation, and broad signal compatibility, it is an excellent choice for optimizing performance in critical applications.
Enhance Your Industrial Automation Today
Invest in the PR Electronics 5114B Programmable Transmitter for superior signal reliability and performance. Contact us now for pricing, specifications, and expert support.